ground heat transfer

Forums Welcome to the support forum! ground heat transfer

This topic contains 2 replies, has 2 voices, and was last updated by  Ticiana 2 months, 2 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1550

    Ticiana
    Participant

    Hi, the project i am working on is small so I would like to analyse the ground heat transfer. Is there any way to do this? The document “Auxiliary Programs” (https://energyplus.net/sites/default/files/pdfs_v8.3.0/AuxiliaryPro…) shows a workflow for energy plus, but I donĀ“t know how to adapt it to Archsim…

    Any help is appreciated! Thank you!

    #1551

    francesca.pagliaro
    Participant

    Hi Ticiana, you should use the “boundary condition object” component. This component couples one or more surfaces of your building with the ground, which is considered as characterized by monthly average temperatures. You can change these temperatures either in the idf file, or in the advanced settings of the E+ component.

    I hope this will be helpful.

    Francesca

    #1552

    Ticiana
    Participant

    It worked! Thank you, Francesca!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.