Error with running E+

Forums Welcome to the support forum! Error with running E+

This topic contains 6 replies, has 4 voices, and was last updated by  rebaz89 2 months, 1 week ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #1101

    hi Timur,

    I have a problem with running E+, the error message is showed in the image below.

    I already have EnergyPlus 8.1.0 installed in my computer, what might be the problem?

    Thanks!

    Attachments:
    You must be logged in to view attched files.
    #1103

    Timur
    Keymaster

    It looks good. This is not an error. As long as you do not see severe errors in the message everything is fine.

    #1104

    Ok, thanks for your help, but I check my files, some of the CSV are 0kB, I wonder if there is a problem there? And I can’t load my resuls either.

    I have another question also, is it possible to build the model in ArchSIM and then use ladybug component like PMV calculator? And which file should I load?

    Thanks!

    Attachments:
    You must be logged in to view attched files.
    #1109

    Timur
    Keymaster

    Did you select any outputs in the Energy-plus component [Settings Btn]?
    I am not very familiar with the PMV component but I seems like it should work. You can also select a comfort metric as Archsim output though.. might be easier.

    Best
    T

    #1111

    Ok, I will give a try, thanks for your help Timur!

    #1547

    mathilde
    Participant

    Hello!
    I have quite the same problem. The similar warning.
    When I run E+ in Archsim, the simulation cannot run and all the files, that we need for the following steps, cannot be generated.
    So I decided to run E+ (8.1.0) separately and use Ep launch. And there was no errors mentioned and all the result files was created.
    But they cannot be used in the ArchSim script because it was not from the Archsim simulation.

    The error message is :

    1. Program Version,EnergyPlus-Windows-64 8.1.0.008, YMD=2017.06.29 13:19,IDD_Version 8.1.0.008
    ** Warning ** Version: in IDF=”8.2″ not the same as expected=”8.1.0″
    ** Warning ** CheckUsedConstructions: There are 2 nominally unused constructions in input.
    ** ~~~ ** Each Unused construction is shown.
    ************* Construction=DEFAULTCONSTRUCTION_FLIPPED
    ************* Construction=DEFAULTGLAZING_FLIPPED
    ** Warning ** GetPurchasedAir: ZoneHVAC:IdealLoadsAirSystem=”ZONE0 IDEAL LOADS AIR missing data
    ** ~~~ ** ZONE0_OUTDOORINLET does not appear in an OutdoorAir:NodeList or as an OutdoorAir:Node.
    ** ~~~ ** Adding OutdoorAir:Node=ZONE0_OUTDOORINLET
    ************* Testing Individual Branch Integrity
    ************* All Branches passed integrity testing
    ************* Testing Individual Supply Air Path Integrity
    ************* All Supply Air Paths passed integrity testing
    ************* Testing Individual Return Air Path Integrity
    ************* All Return Air Paths passed integrity testing
    ************* No node connection errors were found.
    ************* Beginning Simulation
    ************* Simulation Error Summary *************
    ** Warning ** The following schedule names are “Unused Schedules”. These schedules are in the idf
    ** ~~~ ** file but are never obtained by the simulation and therefore are NOT used.
    ************* Schedule:Year or Schedule:Compact or Schedule:File or Schedule:Constant=OFF
    ** Warning ** The following week schedule names are “Unused Schedules”. These schedules are in the idf
    ** ~~~ ** file but are never obtained by the simulation and therefore are NOT used.
    ************* Schedule:Week:Daily or Schedule:Week:Compact=OFF_wk_
    ** Warning ** The following day schedule names are “Unused Schedules”. These schedules are in the idf
    ** ~~~ ** file but are never obtained by the simulation and therefore are NOT used.
    ************* Schedule:Day:Hourly or Schedule:Day:Interval or Schedule:Day:List=OFF_dy_
    *************
    ************* ===== Final Error Summary =====
    ************* The following error categories occurred. Consider correcting or noting.
    ************* Nominally Unused Constructions
    ************* ..The nominally unused constructions warning is provided to alert you to potential conditions that can cause
    ************* ..extra time during simulation. Each construction is calculated by the algorithm indicated in the HeatBalanceAlgorithm
    ************* ..object. You may remove the constructions indicated (when you use the DisplayExtraWarnings option).
    *************
    ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.
    ************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors.
    ************* EnergyPlus Completed Successfully– 6 Warning; 0 Severe Errors; Elapsed Time=00hr 00min 2.81sec

    Can you help me please? What should I do?

    Thanking you in advance!

    Attachments:
    You must be logged in to view attched files.
    #1554

    rebaz89
    Participant

    Hej Mathilde

    did you find a soulutoin for the problem “RunEnergyPlus: Det går inte att hitta filen “C:\temp\energyplus” “C:\temp\energyplus” idf “D:\test\DNK_Copenhagen.061800_IWEC.epw” EP N nolimit N Y 0 N”

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.